These oxygen bottle holders are suitable for the majority of Schempp-Hirth gliders. Please choose whether you have a pure glider or glider with a sustainer engine, there is a subtle difference in the design of the clamp opening.
Please choose which holder you need according to the diameter of your Oxygen-bottle. It is possible to adjust the holder by +/- 2mm.
In single-seaters, one of the screws of the holder is often above the spar bridge, where the wall is relatively thin. It is therefore often necessary to add the washer B40-2218 (click here).
The oxygen-bottle holder is fixed to the glider by two screws, which are supplied. The distance between the screws is 138 mm (between the centre of the holes). If this distance is different in your glider, please contact us.
The Ventus-3 sport doesn't need an oxygen bottle holder at the back, only the oxygen neck-holder.
