CAN Y cable from 2xDB9 to M12 to allow the connection of the LXNAV CAN Bridge for Radios and Transponders to be connected to an S Vario.
More Information
| Supported radio stations and transponders: | |
| | | | |
| | Device name | Tested with physical device? | Notes |
| | ACD57 | Yes | - |
| RADIO | BECKER CM4201 | - | Physical device needed to test. |
| RADIO | DITTEL KRT2 | Yes | - |
| RADIO | GARMIN SL40 | - | Physical device needed to test. |
| RADIO | BECKER AR6201 | | AR6201 Versions Issue 04 doesn't support RS-232 connections. |
| |
| BECKER RT6201 |
| |
| BECKER RCU6201 |
| |
| BECKER AR6203 |
| RADIO | FUNKWERK ATR833 | Yes | Minimum radio firmware version 6.4 |
| RADIO | FUNKWERK ATR833-II | | Radio version: |
| HW2.0, SW1.05, FW3.00 |
| RADIO | TRIG TY91/92 | Yes | - |
| TRANSPONDER | ACD57 | Yes | - |
| TRANSPONDER | BECKER BXP6402 | Yes | - |
| TRANSPONDER | FUNKWERK TRT800 | - | The status interface is a TX-only connection, not possible to control it. |
| TRANSPONDER | TRIG TT 21/22 | Yes | - |
Specifications
Customer Reviews
